3D Models

Standard bladder

Replacement pressure-tank bladder in butyl or EPDM, holds the air-to-water boundary that keeps well and expansion tanks at steady pressure; NSF 61 potable grades available.

Full-acceptance oval bag

Full-acceptance bag for expansion and storage tanks, the water contacts only the bag, never the tank steel.

End-collar bag with tab

Replacement bag with a molded end collar and locating tab, sized to well- and expansion-tank OEM lines.

Flow-thru bag

Flow-through tank bag, system water passes through while the bag absorbs pressure surges and thermal expansion.

Molded collar

Molded collar for pressure-tank bags, the ring that cement-bonds to the bag and seals it to the tank port.

Armored wedge gasket

Metal-armored wedge gasket for mechanical pipe couplings and repair clamps, molded by grade and style over the full IPS/CTS size range.

Wedge gasket

Wedge gasket for mechanical couplings, the sealing element inside mechanical coupling and pipe-repair joints (styles 65, 90, 401, 711).

Cone gasket

Cone gasket for coupled pipe joints, centers and seals conical coupling faces.

Plain ring gasket

Plain ring gasket for flanged and coupled connections, molded by grade to the required size.

Split gasket

Split gasket for pipe-repair clamps, wraps onto in-service pipe without cutting the line.

Insulating gasket set

Dielectric insulating gasket set, seals a flanged joint while electrically isolating the flanges to stop galvanic corrosion and stray current.

Seat pad

Seat pad for pipe couplings and shut-off hardware, part of the sealing set in repair and valve systems.

Mesh strainer

Rubber-framed mesh strainer for pipe and waterworks systems, screens debris at the port.

Stop-changer plug

Stop-changer plug for waterworks stop / shut-off hardware, seals and positions inside the mechanism.

Centerbond mount, size 11

Centerbond isolation mount, rubber bonded between a load stud/plate and base, durometer-rated and frequency-tuned for NVH isolation.

Ring & bushing mount, size 13

Ring-and-bushing mount, rubber bonded between concentric inner and outer metal for radial isolation.

Sandwich mount

Sandwich (shear) mount, a rubber layer bonded between two metal plates for compact vibration isolation.

Compression spring

Molded elastomer compression spring, stores and returns energy where a steel spring won't fit or would corrode.

Torsion drive bushing

Torsion / drive bushing, bonded rubber loaded in twist to transmit and cushion drive torque in vibratory and rotating equipment.

Wiper elastic member

Elastic member for vibratory processing lines, stores and returns energy on every stroke of a vibratory feeder or screener.

Coupling block

Elastomer drive / coupling block for vibratory lines, passes torque between coupling jaws while cushioning shock and misalignment.

Stabilizer insulator

Stabilizer-bar bushing / shaft insulator, lets the anti-roll bar rotate while isolating road noise; molded to automotive and truck OEM specs under IATF 16949.

Control-arm bumper

Control-arm bumper, a progressive-rate cushion that limits and softens suspension travel.

Jounce / stud bumper

Jounce / stud bumper, absorbs suspension impact at the end of travel and mounts by a molded-in stud.

Body-bolt cushion

Body-bolt cushion assembly, isolates a vehicle body from the frame at the mounting bolts.

Elastomeric rod end

Elastomeric rod end, a rubber element bonded to a metal insert lets the linkage swivel with no metal-on-metal free play; used in aerospace and demanding motion control.

Rod-end housing (metal)

Rod-end housing, the machined metal body that carries the bonded bearing element in a motion joint.

Spherical bearing

Spherical / pivot bearing, swivels to take up angular misalignment in linkages and flight-control systems.

Direct-fixation track pad

Direct-fixation track pad, the resilient layer between rail and slab that manages wheel load, impact, and vibration (DF L-80, FA-series, LMTT systems).

Rail pad, as molded

Under-rail track pad, shown as molded, the elastomer layer that softens wheel loads on mainline and bridge track.

Rail-fastener baseplate

Bonded transit fastener / baseplate, anchors and gauges the rail while isolating it from the structure.

Egg-pad assembly

Egg track pad (canted or non-canted), a studded resilient pad tuned for stiffness and drainage under the rail.

Vibratory ball, 1-1/8 in

1-1/8 in solid molded ball for vibratory screen decks, bounces against the mesh to knock trapped particles loose so the screen doesn't blind. NR, neoprene, EPDM, or FDA silicone.

Vibratory ball, 1-3/8 in

1-3/8 in solid molded ball for vibratory screen decks, bounces against the mesh to knock trapped particles loose so the screen doesn't blind. NR, neoprene, EPDM, or FDA silicone.

Vibratory ball, 1-5/8 in

1-5/8 in solid molded ball for vibratory screen decks, bounces against the mesh to knock trapped particles loose so the screen doesn't blind. NR, neoprene, EPDM, or FDA silicone.

Vibratory ball, 2 in

2 in solid molded ball for vibratory screen decks, bounces against the mesh to knock trapped particles loose so the screen doesn't blind. NR, neoprene, EPDM, or FDA silicone.

Reinforced diaphragm

Fabric-reinforced diaphragm, flexes for millions of cycles to move fluid or sense pressure in pumps, screeners, and expansion tanks.

Umbrella valve

Umbrella valve, a one-way check valve that opens under flow and reseals, metering flow in fluid and hydraulic systems.

O-ring seal

O-ring, the round-section seal that deforms in its gland to seal static or dynamic joints, in application-matched compounds including FDA and fluoroelastomer grades.

Choke seal plug

Choke seal, a molded plug that seals a choke or valve bore against pressure in fluid and fuel-system equipment.

Insulating sleeve

Insulating sleeve, a dielectric sleeve that electrically isolates a bolt or pipe at an insulating joint.

Column-guard U-channel

Column guard, a U-channel elastomer guard that caps and protects a rail or structural edge from impact.

Outrigger crane block

Outrigger / crane support block, spreads the heavy point load of an outrigger foot so it won't sink or damage the surface. Molded in NR / SBR by durometer.

Sheet stock

Rubber slab / sheet stock, custom-durometer stock (including reinforced grades) cut into gaskets, liners, and pads.

Rubber-coated wheel

Rubber-coated wheel, elastomer bonded over a rigid hub for heavy-duty casters and ground-support equipment; carries load while cushioning impact.

Grommet

Molded grommet, protects and seals where wiring, a bolt, or a shaft passes through a panel, and isolates vibration.